The Bench Top Pump Laser (980nm, 1480nm) is designed as a pump source for Erbium-doped fiber amplifier (EDFA) applications, including high power EDFA wavelength division multiplexing and pre-amps broadband CATV networks.
| Features |
| High power (up to 350mW) |
| Broad spectral width |
| Overheating warning |
| EMC protection |
| Applications |
| Fiber amplifier |
| Fiber Optic sensors |
| EDFA applications |
| CATV |
 |
| Specifications |
| Pump Laser Benchtop | Output Power |
Data Sheet |
| 980nm Pump Laser | ||
| OLPL-98-10 | 100mW |
 |
| OLPL-98-15 | 150mW |
|
| OLPL-98-20 | 200mW |
|
| OLPL-98-25 | 250mW |
|
| OLPL-98-30 | 300mW |
|
| 1480nm Pump Laser | ||
| OLPL-48-10 | 100mW |
|
| OLPL-48-15 | 150mW |
|
| OLPL-48-20 | 200mW |
|
| OLPL-48-25 | 250mW |
|
| OLPL-48-30 | 300mW |
|
| Environment |
| Operating temperature | 0ºC to 40ºC |
| Storage temperature | -10ºC to 70ºC |
| Power supply | 110/230V 50/60Hz |
| User Interface |
| Displays | Optical output power, mW |
| Controls | Keylock switch, optical output |
| Alarms | Pump overheating warning |
| Computer Interface | RS232 |
| * The specification for the Pump Laser device without connector. * Isolator only applied to 1480nm Pump Laser. For customized specification on Pump Laser, please contact us at contact@optolinkcorp.com. |
|
| Ordering Codes |
| OLPL - [Wavelength] - [Integrated] - [Grating wavelength] - [Power] - [Connector Type] |
| Wavelength | Code | Integrated | Code | Grating Wavelength | Code | Power | Code | Connector Type | Code |
| 980nm | 98 | Grating | G | 974 nm | 74 | 100mW | 10 | FC/PC | FP |
| 1480nm | 48 | Grating & Isolator (Lower Output Power) |
I | 1470 nm | 70 | 150mW | 15 | SC/PC | SP |
| 200mW | 20 | FC/APC | FA | ||||||
| 250mW | 25 | SC/APC | SA | ||||||
| 300mW | 30 | LC/PC | LP | ||||||
* Isolator only applied to 1480nm Pump Laser. * Opto-Link Corporation Ltd reserves the right to make changes to the products described herein (Pump Laser) without notice. |
|
