The PM Faraday Mirror is used to provide rotation of the input light. It provides low insertion loss, high extinction ratio and excellent environmental stability. The PM Faraday Mirror is applied in fiber amplifiers, fiber lasers and other fiber instruments.
| Features |
| Low Insertion Loss |
| High Extinction Ratio |
| High Stability and Reliability |
| Applications |
| Test Instrumentation |
| Fiber Laser |
| Optical Amplifier |
 |
| Specifications (PM Faraday Mirror) |
| PM Faraday Mirror (1310nm, 1480nm, 1550nm) |
|
Parameter |
Values | Units |
Datasheet |
| Center Wavelength | 1310, 1480, 1550 | nm |
|
| Operating Range | +/-15 | nm |
|
| Insertion Loss | <0.6 (Typ. 0.4) | dB |
|
| Nominal Faraday Rotation Angle (Single Pass) | 45 | degree |
|
| Rotation Angle Tolerance (Single Pass) | <+/-3 | degree |
|
| Extinction Ratio | >20 | dB |
|
| Handling Power | 300 | mW |
|
| Operating Temperature | -5 to +70 | ºC |
|
| Storage Temperature | -40 to +85 | ºC |
| * The specification is for the PM Faraday Mirror without connector. | |
| Ordering Codes |
OLPFM - [Wavelength] - [Lead Type] - [Connector Type] |
Wavelength |
Code |
Lead Type |
Code |
Connector Type |
Code |
1310 nm |
131 |
250 μm |
25 |
No Connector |
NC |
1480 nm |
148 |
900 μm |
90 |
FC/APC |
FA |
1550 nm |
155 |
FC/PC |
FP |
||
FC/UPC |
FU |
||||
SC/APC |
SA |
||||
SC/PC |
SP |
||||
ST/UPC |
ST |
||||
SC/UPC |
SU |
||||
LC/PC |
LP |
||||
LC/UPC |
LU |
||||
MU/PC |
MP |
||||
| * Opto-Link Corporation Ltd reserves the right to make changes to the PM Faraday Mirror without notice. | |
